|
ELECTRODES
WE CARRY A COMPLETE LINE
OF ELECTRODES
AND FILLER RODS!
Hobart ® Electrode E6011 AWS A5.1 3/32 - 5/32 5 lbs / pkg
Hobart® 6011 Welding Electrodes
An all-purpose stick electrode for use in all positions on carbon and galvanized steel. 60,000 PSI tensile strength. Deep penetrating, ideal for welding through light to medium amounts of dirty, rusty or painted materials. Runs on AC or DCEP (reverse) polarity.
Hobart ® Electrode E6013 AWS A5.1 3/32 - 5/32 5 lbs / pkg
Hobart® 6013 Welding Electrodes
A light to medium penetrating all-purpose stick electrode for use in all positions, on carbon steel. Runs on AC or DCEP (reverse) polarity or DCEN (straight) polarity. 60,000 PSI tensile strength. Good for general, all-purpose applications and joints with poor fit-up.
Hobart ® Electrode E7014 AWS A5.1 1/8 - 5/32 5 lbs / pkg
Hobart® 7014 Welding Electrodes
For high-deposition requirements, this stick electrode is ideal for applications requiring light penetration and faster travel speeds. It runs in all positions on AC or DCEN (straight) or DCEP (reverse) polarity. 70,000 PSI tensile strength.
Hobart ® Electrode E7018 AWS A5.1 3/32 - 5/32 5 lbs / pkg
Hobart® 7018 Welding Electrodes
A low-hydrogen electrode for use in all positions on low, medium and high-carbon steels. 70,000 PSI tensile strength. Ideal for out-of-position welding and tacking. Runs on AC or DCEP (reverse) polarity. Not recommended for low-voltage AC welders.
Hobart ® Electrode E7018AC AWS A5.1 1/8" 5 lbs / pkg
Hobart® 7018AC Welding Electrodes
A low-hydrogen electrode for use in all positions on low, medium and high-carbon steels. 70,000 PSI tensile strength. Ideal for out-of-position welding and tacking. Runs on AC or DCEP (reverse) polarity.
Specially formulated to operate with small 208/230 volt AC welders.
STAINLESS STEEL
Stainless Electrode 308-16 3/32 - 5/32 10 lbs / pkg
Stainless Electrode 308L-16 3/32 - 5/32 10 lbs / pkg
Stainless Electrode 309-16 3/32 - 5/32 10 lbs / pkg
Stainless Electrode 309L-16 3/32 - 5/32 10 lbs / pkg
|
